Главная,Галерея,Контакт,Заказать,Контакт

понедельник, 6 июля 2015 г.

Красивый квадрат от MYPICOT

Мне понравился прием вязания квадрата от MyPicot. Если подобрать правильные оттенки ниток,то получится очень красиво. Таким узором можно связать плед,одеяло,покрывало,пончо и т.д. 




Описание на английском,но по фото хорошо видно,как вязать...


Techniques used in this stitch (British term / American term):
Chain stitch – ch
Slip stitch – sl.st
Double crochet / Single crochet – dc / sc
Double treble / Treble – d.tr / tr
Front Post dc / sc – FPdc / sc
Shell: work 3d.tr + 2ch + 3d.tr in the same space.
Stitch - st
For more information about the stitches please visit the page of Textured Bubble Stitch:

Make 6ch and sl.st in last ch.
Round 1: Make 5ch, 2 d.tr/tr in ring of 6ch, * 2ch, 6 d.tr/tr in ring; rep from * 2 times more, 2ch, 3 d.tr/tr in ring, sl.st in 5th ch, turn.
 
Round 2: 1ch, 1FPdc/sc over each of the next 3d.tr/tr below, * 7dc/sc in space of 2ch, 1FPdc/sc over each of the next 3d.tr/tr below, 2ch, 1FPdc/sc over each of the next 3d.tr/tr; rep form * 2 times more, 7dc/sc in space of 2ch, 1FPdc/sc over each of the next 2d.tr/tr below, 1FPdc/sc over 5ch, 1ch, 1dc/sc in 1st FPdc/sc of the round, turn.
Round 3: Make 5ch, 2 d.tr/tr + 2ch + 3 d.tr/tr in space between 1ch and dc/sc below, * work 1dc/sc through 1st and 7th sts below: insert your hook from front to back under the top 2 loops of 1st dc/sc, then from back to front under the top 2 loops of the 7th dc/sc and work dc/sc, 2 shells in space of 2ch; rep from * 2 times more, 1dc/sc through 1st and 7th dc/sc below, shell in space between 1ch and dc/sc below, sl.st in 5th ch, turn.
Round 4: 1ch, * 1FPdc/sc over each of the next 3d.tr/tr below, 7dc/sc in space of 2ch, 1FPdc/sc over each of the next 3d.tr/tr below, 1ch, 1FPdc/sc over each of the next 3d.tr/tr, 7dc/sc in space of 2ch, 1FPdc/sc over each of the next 3d.tr/tr below, 2ch; rep form * 2 times more, 1FPdc/sc over each of the next 3d.tr/tr below, 7dc/sc in space of 2ch, 1FPdc/sc over each of the next 3d.tr/tr below, 1ch, 1FPdc/sc over each of the next 3d.tr/tr, 7dc/sc in space of 2ch, 1FPdc/sc over each of the next 2d.tr/tr below, 1FPdc/sc over 5ch, 1ch, 1dc/sc in 1st FPdc/sc of the round, turn.
Round 5:
Work next steps:
1 - "Beginning of the round #1": 5ch, 2 d.tr/tr + 2ch + 3 d.tr/tr in space between 1ch and dc/sc below.
2 - "Middle stitches #1": 1dc/sc through 1st and 7th dc/sc below, shell in space of 1ch, 1dc/sc through 1st and 7th dc/sc below.
3 - "Point #1": work 2 shells in space of 2ch.
Repeat steps: 2 – 3 – 2 – 3 – 2.
4 - "Finishing of the round #1": work shell in space between 1ch and dc/sc below, sl.st in 5th ch, turn.
Round 6:
Work next steps:
1 - "Beginning of the round #2": 1ch, 1FPdc/sc over each of the next 3d.tr/tr below, 7dc/sc in space of 2ch, 1FPdc/sc over each of the next 3d.tr/tr.
2 - "Middle stitches #2": 1ch, 1FPdc/sc over each of the next 3d.tr/tr below, 7dc/sc in space of 2ch, 1FPdc/sc over each of the next 3d.tr/tr, 1ch.
3 - "Point #2": 1FPdc/sc over each of the next 3d.tr/tr, 7dc/sc in space of 2ch, 1FPdc/sc over each of the next 3d.tr/tr , 2ch, 1FPdc/sc over each of the next 3d.tr/tr, 7dc/sc in space of 2ch, 1FPdc/sc over each of the next 3d.tr/tr.
Repeat steps: 2 – 3 – 2 – 3 – 2.
4 - "Finishing of the round #2": 1FPdc/sc over each of the next 3d.tr/tr, 7dc/sc in space of 2ch, 1FPdc/sc over each of the next 2d.tr/tr below, 1FPdc/sc over 5ch, 1ch, 1dc/sc in 1st FPdc/sc of the round, turn.
Round 7:
Work next steps:
1 - "Beginning of the round #1": see Round 5.
2 - "Middle stitches #1": * 1dc/sc through 1st and 7th dc/sc below, shell in space of 1ch; rep from *, 1dc/sc through 1st and 7th dc/sc below.
3 - "Point #1": see Round 5.
Repeat steps: 2 – 3 – 2 – 3 – 2.
4 - "Finishing of the round #1": see Round 5.
Round 8:
Work next steps:
1 - "Beginning of the round #2": see Round 6.
2 - "Middle stitches #2": * 1ch, 1FPdc/sc over each of the next 3d.tr/tr below, 7dc/sc in space of 2ch, 1FPdc/sc over each of the next 3d.tr/tr; rep from *, 1ch..
3 - "Point #2": see Round 6.
Repeat steps: 2 – 3 – 2 – 3 – 2.
4 - "Finishing of the round #2": see Round 6.
Repeat rows 7 - 8 until you have reached your desired size of square.

LinkWithin

Related Posts Plugin for WordPress, Blogger...

LinkWithin

Related Posts Plugin for WordPress, Blogger...

LinkWithin

Related Posts Plugin for WordPress, Blogger...
Related Posts Plugin for WordPress, Blogger...
!-- Rating@Mail.ru counter -->